7 - If Trouble Arises | Battery Runs Out
1. Remove the battery cover.
2. Make sure the booster battery is 12V and that its negative
terminal is grounded.
3. If the booster battery is in another vehicle, do not allow both
vehicles to touch. Turn off the engine of the vehicle with the
booster battery and all unnecessary electrical loads in both vehicles.
4. Connect the jumper leads in the exact sequence as in the illustration.
* Connect one end of a lead to the positive terminal on the
discharged battery (1).
* Attach the other end to the positive terminal on the booster battery (2).
* Connect one end of the other lead to the negative terminal of the booster battery (3).
* Connect the other end to the ground point indicated in the illustration away from the discharged
battery (4).
5. Start the engine of the booster vehicle and run it a few minutes.
Then start the engine of the other vehicle.
6. When finished, carefully disconnect the leads in the reverse order described in the illustration.
7. If the battery cover has been removed, install it in the reverse order of removal.
NOTE
Verify that the covers are securely installed.