Bright-Metal Maintenance
* Use tar remover to remove road tar and insects.
Never do this with a knife or similar tool.
* To prevent corrosion on bright-metal surfaces, apply wax or chrome preservative and rub it to a high lustre.
* During cold weather or in coastal areas, cover bright-metal parts with a coating of wax or preservative heavier than usual.
It would also help to coat them with noncorrosive petroleum jelly or some other protective compound.
CAUTION
Do not use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodised aluminium parts.
This may result in damage to the protective coating and cause discolouration or paint deterioration.
Undercoating
This special coating is applied to the critical parts of the underside to protect vehicles from damage caused by chemicals or stones.
This coating is liable to be damaged with time. Check this coating periodically.
An expert repairer, we recommend an Authorised Mazda Repairer are well informed on how repairs should be made.
Consult an expert repairer, we recommend an Authorised Mazda Repairer.
Aluminium Wheel Maintenance *
A protective coating is provided over the aluminium wheels.
Special care is needed to protect this coating.
CAUTION
Do not use any detergent other than mild detergent. Before using any detergent, verify the ingredients.
Otherwise, the product could discolour or stain the aluminium wheels.
NOTE
* Do not use a wire brush or any abrasive cleaner, polishing compound, or solvent on aluminium wheels.
They may damage the coating.
* Always use a sponge or soft cloth to clean the wheels. Rinse the wheels thoroughly with lukewarm or cold water.
Also, be sure to clean the wheels after driving on dusty or salted roads to help prevent corrosion.
* Avoid washing your vehicle in an automatic car wash that uses high-speed or hard brushes.
* (16-inch wheel vehicle)
If your aluminium wheels lose lustre, apply wax which contains no polishing powder.
* Some models.
