1. Pictorial 2. Safety 3. Before Driving 4. When Driving 5. Interior 6. Maintenance 7. Trouble 8. Customer Info 9. Specifications

Home Contents Index

About

<  Back

Close Manual

Page 14 of 58

6 - Maintenance and Care  |  Owner Maintenance

Vehicle Engine Control Unit Reset Procedure

NOTE

This procedure is intended for vehicles with SKYACTIV-D 1.5 and vehicles with SKYACTIV-G 1.3 or

SKYACTIV-G 1.5 which the engine oil flexible maintenance setting is selected.

After replacing the engine oil, have a repair shop such as an Authorised Mazda Repairer perform the initialization (engine oil data resetting) of the recorded value.

If the value recorded by the computer is not initialized, the wrench indicator light may not turn off or it

may turn on earlier than normal.

NOTE

The initialization (engine oil data resetting) of the recorded value can be performed using the following procedure:

 1. Switch the ignition OFF.

 2. Switch the ignition ON with the selector pressed, and press and hold the selector for about 5 seconds

     until the master warning lightflashes.

 3. After the master warning lightflashes for several seconds, the initialization is completed.