Scan tuning
Press and hold the scan button (MEDIA) to automatically sample strong stations. Scanning stops at each station for about 5 seconds.
To hold a station, press and hold the scan button (MEDIA) again during this interval.
Preset channel tuning
The 6 preset channels can be used to store 6 MW/LW and 12 FM stations.
1. To set a channel first select MW/LW, FM1, or FM2. Tune to the desired station.
2. Press a channel preset button for about 2 seconds until a beep is heard. The preset channel number or station frequency will be
displayed. The station is now held in the memory.
3. Repeat this operation for the other stations and bands you want to store.
To tune one in the memory, select MW/LW, FM1, or FM2 and then press its channel preset button.
The station frequency or the channel number will be displayed.
Radio Data System (RDS)
NOTE
The radio data system (RDS) does not function if it is out of the system's service coverage area.
Alternative frequency (AF)
AF functions on FM stations.
Press the menu button (MENU) and select the AF mode to turn it on and “AF” will be displayed.
If the radio reception of the current station weakens, the system switches to an alternative station automatically.
If you wish to continue a regional programme, press the menu button (MENU) and select the REG mode to turn it on.
“REG ON” is displayed.
To cancel it, press the audio control dial and select the REG mode to turn it off. “REG OFF” is displayed.
Traffic announcement (TA)
If the traffic announcement button (TA) is pressed, the unit switches to TA mode and “TA” is displayed.
If a TA broadcast is received while in the TA mode, the TA broadcast intercedes even while using other functions (FM, CD, USB device, AUX, or BT audio), and “ Traffic Info ” is displayed.
During a TA broadcast, press the traffic announcement button (TA) to end the broadcast and return to the previous mode.
