3. Set the cruise control by pressing the SET+ or SET- switch at the desired speed.
The cruise control is set at the moment the SET+ or SET- switch is pressed.
Release the accelerator pedal simultaneously. The cruise set indicator light (Green) illuminates.
NOTE
* The cruise control speed setting cannot be performed under the following conditions:
* (Automatic transaxle)
The selector lever is in the P or N position.
* (Manual transaxle)
The shift lever is in the neutral position.
* The parking brake is applied.
* (Vehicles with adjustable speed limiter)
The ON/OFF switch for the adjustable speed limiter is pressed.
* Release the SET+ or SET- switch at the desired speed, otherwise the speed will continue increasing
while the SET+ switch is pressed and held, and continue decreasing while the SET- switch is pressed
and held (except when the accelerator pedal is depressed).
* On a steep grade, the vehicle may momentarily slow down while ascending, or speed up while
descending.
NOTE
* Cruise control will cancel if the vehicle speed decreases below 21km/h (13mph) when cruise is
activated, such as when climbing a steep grade.
* Cruise control may cancel at about 15km/h (9mph) below the preset speed (such as may happen
when climbing a long, steep grade).
To Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control switch
Press the SET+ switch and hold it. Your vehicle will accelerate.
Release the switch at the speed you want.
Press the SET+ switch and release it immediately to adjust the preset speed.
Multiple operations will increase the preset speed according to the number of times it is operated.
Increasing speed with a single SET+ switch operation
Meter display for vehicle speed indicated in km/h: 1km/h (0.6mph)
Meter display for vehicle speed indicated in mph: 1mph (1.6km/h)
