3 - Before Driving | Driving Tips
NOTE
* If your vehicle is equipped with the tyre pressure monitoring system, the system may not function correctly when using tyre chains.
* Use of tyre chains on a vehicle equipped with 185/60R16 tyres could cause interference with the vehicle body and scratching.
If tyre chains are to be used, replace both the front and rear tyres with 185/65R15 tyres and replace both the front and rear wheels
with genuine Mazda 15-inch wheels of the same size, and use genuine Mazda tyre chains.
Consult an expert repairer, we recommend an Authorised Mazda Repairer.
Install the chains on the front tyres only. Do not use chains on the rear tyres.
Tyre chain selection (Europe)
Mazda recommends hexagon type steel ring chains.
Select the proper type according to your tyre size.
NOTE
Although Mazda recommends hexagon type steel ring chains, all chains within the installation
specifications may be used.
Installation specification (Europe)
When installing tyre chains, the distance between the tyre tread and the chain must be within
the prescribed limits in the following table.
Installing the chains
1. If your vehicle is equipped with wheel covers remove them, otherwise the chain bands
will scratch them.
2. Secure the chains on the front tyres as tightly as possible.
Always follow the chain manufacturer's instructions.
3. Retighten the chains after driving 1/2—1 km (1/4—1/2 mile).