To cancel the intrusion sensor, press the intrusion sensor cancel button on the transmitter within 20 seconds after pressing the lock button. The hazard warning lights will flash three times.
NOTE
* To reactivate the intrusion sensor, turn off the armed theft-deterrent system and then rearm it.
* The intrusion sensor is operational when the theft-deterrent system is armed. To cancel the intrusion sensor, press the
intrusion sensor cancel button each time the theft-deterrent system is armed.
To Turn Off an Armed System
An armed system can be turned off using any one of the following methods:
* Pressing the unlock button on the transmitter.
* Starting the engine with the push button start.
* (With the advanced keyless function)
* Pressing a request switch on the doors. The hazard warning lights will flash twice.
NOTE
When the doors are unlocked by pressing the unlock button on the transmitter while the theft-deterrent system is turned off, the hazard warning lights will flash twice to indicate that the system is turned off.
To Stop the Alarm
A triggered alarm can be turned off using any one of the following methods:
* Pressing the unlock button or the boot button (saloon) on the transmitter.
* Starting the engine with the push button start.
The hazard warning lights will flash twice.
A label indicating that your vehicle is equipped with a Theft-Deterrent System is in the glove compartment.
Mazda recommends that you affix it to the lower rear corner of a front door window.
