3 - Before Driving | Doors and Locks
NOTE
Function number 3 in the following table is the factory setting for your vehicle.
There are only a total of six auto lock/unlock settings available for automatic transaxle vehicles, and three for manual transaxle vehicles. Be sure to press the unlock side of the driver's door-lock switch the correct number of times according to the selected function number.
If the switch is mistakenly pressed seven times on an automatic transaxle vehicle or four times on a manual transaxle, the procedure will be cancelled. If this occurs, start the procedure from the beginning.
*1 Other settings for the auto door lock function are available at an expert repairer, we recommend an Authorised Mazda Repairer.
For details consult an expert repairer, we recommend an Authorised Mazda Repairer.
Refer to Personalisation Features on page 9-12.
Settings can be changed using the following procedure.
1. Safely park the vehicle. All doors must remain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the driver's door-lock switch within 20 seconds of switching the ignition ON,
and make sure a beep sound is heard about eight seconds afterwards.
4. Refer to the auto lock/unlock function setting table, determine the function number for the desired setting.
Press the unlock side of the driver's door-lock switch the same number of times as the selected function number
(Ex. If you select function 2, press the unlock side of the switch only 2 times).