NOTE
Use the following procedure to change the setting.
1. Switch the ignition off and close all of the doors and the liftgate/boot lid.
2. Open the driver's door.
3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer.
All of the doors and the liftgate/boot lid lock and the beep sound activates at the currently set volume.
The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume.
(If the beep sound has been set to not activate, it will not activate.)
4. The setting change is completed by doing any one of the following:
* Switching the ignition to ACC or ON.
* Closing the driver's door.
* Opening the liftgate/boot lid.
* Not operating the key for 10 seconds.
* Pressing any button except the LOCK button on the key.
* Pressing a request switch.
NOTE
* (With theft-deterrent system)
The hazard warning lights flash when the theft-deterrent system is armed or turned off.
Refer to Theft-Deterrent System on page 3-35.
* (With double locking system)
Pressing the request switch twice within 3 seconds will activate the double locking system.
Refer to Double Locking System on page 3-7.
